Sony DVP-FX810 - Manual (Page 18)

Pu t and facing in the same direction, insert the two
R6 batteries (AA, included).
Insert the terminals first
Putting Batteries in the Remote Control Putting Batteries in the Remote Control
Using the Remote Control
1. Correctly insert and in the proper direction.
2. Do not use a mix of old and used batteries or batteries
of different types.
3. Do not attempt to recharge normal batteries.
4. When the remote control has not been used for some
time, please change its batteries.
5. If there is any leakage of battery fluid, carefully wipe
up any liquid from the battery compartment before
putting in fresh batteries.
Using batteries incorrectly may result in leakage or bursting.
MAKE CERTAIN TO FOLLOW THE NEXT STEP.
When using the remote control, be careful that no direct
sunlight or strong light from an illumination source hits
the remote sensor. The remote control may not be able
to function in some conditions.
Notes:
18