Sony DVP-FX810 - Manual (Page 27)

Slow Play Slow Play
1. Press [PAUSE] [ ] while a disc is playing.
The playback will pause.
2. The desired speed can be selected by pressing
[SCAN/SLOW] or .
Fast ＞＞＞＞ Slow
Slow Forward
Slow Reverse
3. To exit from Slow Play Mode, press [PLAY].
Screen Saver Screen Saver
The screen saver is displayed after the player is in Stop
Mode for 15 minutes.
Once the screen saver has been displayed for 15 minutes,
the power be automatically turned off.
Playing Discs Recorded in VR Mode Playing Discs Recorded in VR Mode
Notes: Notes:
When a disc recorded without a playlist is stopped, pressing
[TOP MENU] will cause the prohibit mark to be displayed.
DVD-RW/DVD-R recorded on other DVD recorders (in
VR Mode) must be finalized to play.
Non-finalized DVD-RW /DVD-R (in VR mode) cannot be
played.
For more about finalized discs, please refer to the manual
of the recorder used for recording.
Playing Discs (continued)
In case of DVD-RW/DVD-R(VR Mode), depending on the
contents of the discs, there may be a time lag between
setting the disc in the player and start of playback.
Switching between Playlist and Original Menu is impossible
when the player is in Resume Mode (page 26). Pressing
[STOP] button twice and then [TOP MENU] repeatedly will
make it possible to switch between Playlist and Original Menu.
-Playing discs (DVD-RW/DVD-R) recorded in VR Mode
If no playlist is recorded on a disc, the disc will start by
displaying the original menu.
If a playlist is recorded on a disc set by this player, the
disc will start by displaying the playlist.
Press [TOP MENU] once when the disc is stopped to
display the current mode. To switch between the playlist
and original list press [TOP MENU] repeatedly when the
disc is stopped.
During playback, press [DISPLAY] button to know the
current mode. On the Display screen under
“ Title ” either
Playlist ( PL ) or Original(ORG) will be shown.
27
B
a
s
ic
O
s
p
e
ra
ti
o
n