Sony AVD-S10 - Manual (Page 21)

Getting Star
ted
21 GB
Step 3: TV and Video Component Hookups
Required cords
S Video cord for connecting a TV monitor
Audio cords (not supplied)
When connecting a cord, be sure to match the colour-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a To the
TV monitor MONITOR OUT (S VIDEO) jack
VCR VIDEO (S VIDEO/AUDIO L/R IN/OUT) jacks
Digital satellite receiver TV/SAT (S VIDEO/AUDIO L/R IN) jacks
z When using the COMPONENT VIDEO OUT jacks instead of the S Video jacks (Y, P
B
/C
B,
P
R/
C
R
)
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, P
B
/C
B
, P
R
/C
R
).
Notes
• When you select VIDEO using the FUNCTION button, the signal is output from the front L/R speakers, but not
from the VIDEO (AUDIO L/R OUT) jacks.
• When you use the Video line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
Red (R/audio)
White (L/audio)
Red (R/audio)
White (L/audio)