Setup for the system (for asian models), Connecting the ac power cord (mains lead), Vcr digital satellite receiver tv monitor – Sony AVD-S10 User Manual

Page 22

Advertising
background image

22

GB

COAXIAL

AUDIO OUT

S VIDEO OUT

OPTICAL

DIGITAL IN

OPTICAL

DIGITAL IN

OPTICAL

(CD ONLY)

AUDIO IN

S VIDEO IN

S VIDEO

AUDIO IN

AUDIO IN

S VIDEO IN

AUDIO

OUT

FRONT

CENTER

SURROUND

R

+

+

+

+

L

R

L

R

L

R

L

AM

L

R

FM

75

ANT

SPEAKERS

IMPEDANCE USE 6–16

SUB

WOOFER

Y

P

B

/C

B

P

R

/C

R

VIDEO

TV/SAT

TV/SAT

MD/DAT

AUX

DIGITAL OUT

COMPONENT VIDEO OUT (DVD ONLY)

MONITOR OUT

R

S VIDEO

IN

S VIDEO

IN

AUDIO

IN

L

IN

IN

OUT

OUT

OUT

OUTPUT

INPUT

OPTICAL

R

L

S VIDEO

IN

AUDIO

IN

R

L

S VIDEO

IN

AUDIO

IN

If you connect a digital satellite receiver with the TV/SAT (OPTICAL DIGITAL IN)

jack

The digital satellite receiver can be connected to the TV/SAT (OPTICAL DIGITAL IN) jack
instead of the TV/SAT (AUDIO L/R IN) jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over
analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.

If you connect a digital satellite receiver without the TV/SAT (OPTICAL DIGITAL

IN) jack

Connect the digital satellite receiver to the TV/SAT (AUDIO L/R IN) jacks only of the system.

Setup for the system (for Asian models)

Setup is necessary for the system, depending on the TV monitor to be connected.
The initial setting for Asian models is NTSC.

If the colour system of the TV is PAL

*

To set the system to PAL, turn on the system by pressing [/1 on the remote while pressing X
(pause) button on the system. You need to hold the X button until AVD-S10 appears on the
display. To reset to NTSC, turn off the system and then turn on again using the remote while
pressing the X button on the system.
* If the colour system of the TV is NTSC, do the same operation above to set the system to

NTSC.

Connecting the AC Power Cord (mains lead)

Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains),
connect the speakers to the system (see page 17).
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).

VCR

Digital satellite receiver

TV monitor

Advertising