Connecting a digital audio system, Connecting an amplifier / dvd home theater – Samsung series 510 User Manual

Page 15

Advertising
background image

English - 1

Connecting an Amplifier / DVD Home Theater

1 Connect Audio Cables

between the AUDIO OUT

[R-AUDIO-L] jacks on the TV

and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD

Home Theater.

When an audio amplifier is

connected to the “AUDIO

OUT [R-AUDIO-L]” jacks

terminals: Decrease the

volume of the TV, and adjust

the volume level with the

Amplifier’s volume control.

Each Amplifier / DVD Home Theater has a different back panel configuration.

When connecting an Amplifier / DVD Home Theater, match the color of the

connection terminal to the cable.

Amplifier /

DVD Home Theater

TV Rear Panel

Audio Cable (Not supplied)

Connecting a Digital Audio System

The side panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

1 Connect an Optical Cable

between the DIGITAL AUDIO

OUT (OPTICAL) jack on

the TV and the Digital Audio

Input (OPTICAL) jacks on the

Digital Audio System.

When a Digital Audio System

is connected to the “DIGITAL

AUDIO OUT (OPTICAL)”

jack:

Decrease the volume of the

TV, and adjust the volume

level with the system’s

volume control.

What is OPTICAL?

• An optical cable converts an electric signal into an optical light signal, and transmits

it through glass fibers. S/PDIF is a transmission system of digital audio in the form of

a light wave that uses a glass conductor.

DIGITAL AUDIO OUT (OPTICAL) for the HDMI input may not be supported due to

HDCP (High Bandwidth Digital Copy Protection).

Each Digital Audio System has a different back panel configuration.

When the receiver (home theater) is set to On, you can hear sound output from

the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send

out 5.1 channel sound to the Home theater receiver. When the source is a digital

component such as a DVD and is connected to the TV via HDMI, only 2 channel

sound will be heard from the Home Theater receiver.

If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT

(OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or

Home Theater, not the TV.

Digital Audio System

TV Rear Panel

Optical Cable (Not supplied)

BP68-00666A-01Eng.indb 15

2008-04-22 오후 8:18:52

Advertising