Samsung series 510 - Manual (Page 47)

English - 4
Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video
signals it receives from the PC. The function also automatically fine-tunes the
settings and adjusts the frequency values and positions.
1 The message Auto Adjustment in progress. Please wait. appears on the
screen and the picture adjustments are automatically activated.
Press the EXIT button to exit.
➢ This function does not work in DVI-Digital mode.
➢ Preset: Press the SOURCE button to select PC mode.
 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
Press the ▲ or ▼ button to select Auto Adjustment, then press the ENTER
button.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture
noise. If the noise is not removed by fine tuning alone, then make the vertical
frequency adjustments and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned in the center of the screen.
➢ Preset: Press the SOURCE button to select PC mode.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the ENTER button.
Press the ▲ or ▼ button to select Screen, then press the ENTER button.
Continued...
Auto Adjustment in progress. Please Wait.
Screen
Enter Return Move
50
0 Coarse
Fine
Position
Image Reset
Mode : Standard ►
Contrast : 95
Brightness : 45
Sharpness : 50
Auto Adjustment
Screen
Detailed Settings
Picture Options
Picture
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Detailed Settings
Picture Options
Picture Reset
Picture
Sharpness : 50
Auto Adjustment
Screen ►
Detailed Settings
Picture Options
Picture Reset
Picture
Coarse
Return Enter Adjust
50
Move
BP68-00666A-01Eng.indb 47 2008-04-22 오후 8:19:17