Sony STR-DH100 - Manual (Page 33)

33 GB
Ad
ditional Inf
o
rmation
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Models of area code U, CA, CEL, CEK
1)
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
90 W + 90 W
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
100 W + 100 W
1)
Measured under the following conditions:
Frequency response (Analog)
10 Hz – 70 kHz
+0.5/–2 dB (with BASS =
0 dB, TREBLE = 0 dB)
Inputs (Analog) Sensitivity: 500 mV/
50 kohms
S/N
2)
: 96 dB
(A, 500 mV
3)
)
Outputs (Analog)
AUDIO OUT Voltage: 500 mV/10 kohms
Tone
Gain levels ±10 dB, 1 dB step
2)
INPUT SHORT (with BASS = 0 dB, TREBLE =
0 dB) .
3)
Weighted network, input level.
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna (aerial) Loop antenna (aerial)
Intermediate frequency
450 kHz
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5 V, 0.7 A MAX
Power consumption
Dimensions (w/h/d) (Approx.)
430 Ч 132.5 Ч 279 mm
(17 Ч 5 1/4 Ч 11 inches)
including projecting parts
and controls
Mass (Approx.) 6.6 kg (14 lb 9 oz)
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50 Hz
Area code Tuning scale
10 kHz step 9 kHz step
U, CA 530 –
1,710 kHz
531 –
1,710 kHz
CEL, CEK – 531 –
1,602 kHz
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK 230 V AC, 50/60 Hz
Area code Power consumption
U, CA, CEL, CEK 200 W
continued