SpectraLink NetLink 8000 - Manual (Page 14)

14
Ge
tti
ng St
ar
te
d
GETTING STARTED
Your NetLink 8000 Series Wireless Telephone is designed for full
mobility within the workplace and operates much like a cell phone.
It also interfaces with the telephone system at your workplace and
incorporates advanced telephony features. This section covers the
basic functions available in every facility. For specific telephony sys-
tem functions, see the Facility-Specific Features section or contact your
system administrator.
Basic Handset Operation Summary

Place the handset into the charger for a minimum of
two hours. The handset's Battery Pack must be fully
charged before its first use. See the section Charger
Models for full information.
If you want to Then
Remove the
Battery Pack
Press down on the latch on the Battery
Pack at the back of the handset and pull
the Battery Pack towards you. The
Battery Pack releases outward.
Replace the
Battery pack
Slide the lip of the Battery Pack into the
bottom of the cavity. Push the top of the
Battery Pack until it snaps into place. You
should not have to force it into the
handset.
Turn handset on Press and hold the END key until two
chirps sound.
Turn handset off Press and hold the END key. One chirp
will sound. If you are in a call, hang up
first, then turn off the handset.