SpectraLink NetLink 8000 - Manual (Page 15)

15
Gett
in
g S
ta
rted
Unlock the keypad Press the Unlk softkey, then # , to unlock
the keypad.
Lock the keypad Press the Lock softkey.
Make an internal call Press the START key, wait for a dial tone,
then dial the extension.
Make an external call Press the START key, wait for a dial tone,
then dial the number just as you would
from your desk phone.
Make an emergency
call
Open the speed-dial list to determine if
you have an emergency speed-dial number
that has been programmed by your system
administrator. If so, it will appear as the
first item on the speed-dial list with a >
in front of it and the programmed
keypress as the next character. Press the
programmed key for 3 seconds to activate
the call. See Open the speed-dial list below.
Select a line If multiple lines are available, your
telephone system may require you to
select a line before dialing a number.
Press LINE and the number key
corresponding to the desired line. You
will hear a dial tone.
Dial a number Once you hear a dial tone, press the
number keys to dial the number.
Predial a number From standby mode, press the keypad to
enter up to 20 numbers. Then dial the call
by pressing START , NavOK or the Spkr
softkey.
If you want to Then