Sharp MD-MT877 - Manual (Page 47)

47
Advanced Features
–
T
itling a MiniDisc
–
Titling a MiniDisc : continued
Note:
If the total number of tracks on the master MiniDisc does
not match that on the MiniDisc for stamping, the unit will
display “Can't STAMP” and turn off the power.
If this happens, adjust the total number of tracks on the
newly recorded MiniDisc using the edit operation.
4
Press the ENTER button.
5
When the unit displays “CHANGE MD”,
remove the master MiniDisc.
Remove it without turning off the power. Or, the op-
eration will be canceled.
6
Load a MiniDisc for stamping.
Operation of the MiniDisc for stamping
7
Press the ENTER button.
The unit will finish recording the character informa-
tion and enter the stop mode.