S-Cam CS1300.22 - Manual (Page 2)

Thank you
Thank you for selecting our products. Our personnel have proudly made every effort to ensure that your new pres-
sure washer is of the quality you expect. But things do occasionally go wrong. This is why every pressure washer
is covered by a limited warranty. Among other things, this warranty provides for the replacement of parts found
to be defective during the operation of your new pressure washer. Please note that the owner/operator has cer-
tain obligations under the terms of the warranty. Be sure to read this manual for directions on proper installation,
start-up, use, and storage of your pressure washer.
Your new pressure washer was tested after production for proper pressure and flow. Please note that this process
will sometimes leave a water residue in the pump. The dealer you have purchased your new machine from should
review with you the proper installation, start-up, use, and storage. Most ‘big’ problems occur when shortcuts are
taken in one of these processes. If a problem occurs that you need some assistance with, please feel free to con-
tact us at the listing below:
Warranty Service Center
520 Brooks Road
Iowa Falls, IA 50126
1.800.648.6007
Be familiar with the model plate located on your machine. Have the model and code number with you when
you call for service.
Statement of warranty
The manufacturer of this pressure washer agrees to repair or replace designated parts that prove defective with-
in one year from date of original purchase. Specific limitations and exclusions apply. To make claim under the
terms of the warranty, all parts said to be defective must be returned to the Warranty Service Center listed above
for warranty inspection. The judgments and decisions of the factory personnel concerning the validity of war-
ranty claims are final.
Items not covered by the warranty given by us include motors, engines, and pumps. These components are cov-
ered by warranties given by their respective manufacturers. These warranties pass through to the end user. As a
factory authorized and trained warranty service center, the factory will honor the terms of all component war-
ranties and satisfy claims of the appropriate warranty provisions.
Normal wear items are not covered by this warranty. Normal wear items include hoses, nozzles, filters,
valves, and seals.
This warranty does not cover the following: machines used for rental purposes, damage resulting from shipping,
accident, abuse, misuse, or neglect. Also not covered is damage from repairs or alterations performed by non-
factory authorized personnel or failure to install and operate equipment according to the guidelines put forth in
the instruction manual.
The manufacturer will not be liable to any persons for consequential damage, for personal injury, or for com-
mercial loss.
Please make note of Model Identification
Model
Code
Serial #
Always have this information when calling
Warranty Service Center.