Warning, This equipment must be vented – S-Cam CS1300.22 User Manual

Page 3

Advertising
background image

WARNING

The following warnings must be followed, Failure to follow

these warnings could result in serious personal injury or death!

Never allow children or untrained personnel to operate machinery.

Exhaust gases contain harmful gases.

Use only in well ventilated areas or vent the exhaust to the outside.

Exhaust gases can cause death or serious injury.

THIS EQUIPMENT MUST BE VENTED.

High pressure fluid can create a high pressure stream or ruptured vessel.

Wear safety face shield.

Relieve pressure before servicing.

Do not modify/repair/rework vessel or change safety relief or pressure setting.

Do not direct stream toward self or others.

Pressurized fluid streams and ruptured

pressure vessels can cause death or serious injury.

Kerosene, Fuel Oil or Gasoline will burn when ignited.

Wear face shield and protective clothing.

Do not expose fuel to flames, sparks or other sources of ignition.

Use in well ventilated area or vent to outside area.

Fire can cause death or serious injury.

Electrical equipment can cause shock and sparks.

Do not bypass or remove the grounding prong in any electrical plug. Keep electri-

cal plugs, connections and cords out of water and moisture. Refer to instructions

prior to equipment operation. Disconnect from power source before servicing.

Inspect and repair damaged or exposed electrical components prior to use.Never

splice electrical cords on pressure washers. Be sure the electrical service is ade-

quately sized for the equipment.

High Temperature Water.

Wear protective clothing and face shield.

Do not direct water stream toward self or others.

All hoses should be secured in the lines to be cleaned at least 5 feet.

High pressure water can cause death or serious injury.

Advertising
This manual is related to the following products: