Sanyo DSR-M810 - Manual (Page 30)

English
29
2
REC MODE SET
[Settings] (‹ indicates initial setting.)
z When item (4) “OVER WRITE” is set to “OFF” and the hard disk becomes full, the digital video recorder performs the
operation set by item (5) “DISK FULL RESET”. For how to start recording again, see “Starting recording again when the
FULL indicator lights” on P. 30.
z (6) “SERIES REC” can be set when “OVER WRITE” is “OFF”.
<REC MODE SET> setting items
(1)
(2)
(3)
(4)
(5)
(6)
(7)
<MAIN MENU>
(8)
(9)
Item Setting Description
(1) REC/PB TIME - Displays the possible recording time.
(2)
PICTURE
QUALITY
SUPER+
Super highest image quality. Recording time: approx. 140 hours (300GB), approx. 56 hours
(120GB)
SUPER Highest image quality. Recording time: approx. 210 hours (300GB), approx. 84 hours (120GB).
‹ HIGH High image quality. Recording time: approx. 420 hours (300GB), approx. 168 hours (120GB).
STANDARD Standard image quality. Recording time: approx. 840 hours (300GB), approx. 336 hours (120GB).
(3)
AUDIO
RECORDING ‹ ON Audio recording is performed
OFF Audio recording is not performed
(4) OVER WRITE
‹ ON
When the hard disk runs out of space, recording automatically starts again from the
beginning, recording over previously recorded images.
OFF When the hard disk runs out of space, FULL indicator flashes and recording stops.
(5)
DISK FULL
RESET
NO
Images are not recorded over previously recorded images.
The <WARNING> screen appears, and “NO” flashes.
YES
Images can be recorded over previously recorded images once.
The <WARNING> screen appears. Press the [
] or [ ] button to select “YES”.
(6) SERIES REC
‹ OFF Series recording is not performed.
-1M
When multiple digital video recorders are connected, about 1 minute before the first
recorder’s hard disk becomes full, the second recorder’s hard disk starts recording.
-2M
When multiple digital video recorders are connected, about 2 minutes before the first
recorder’s hard disk becomes full, the second recorder’s hard disk starts recording.
-3M
When multiple digital video recorders are connected, about 3 minutes before the first
recorder’s hard disk becomes full, the second recorder’s hard disk starts recording.
(7) ALARM MODE
‹ OFF Alarm recording is not performed.
ENABLED Alarm recording is always performed, during timer recording or other recording.
AL-REC ON
TIMER
Alarm recording is only performed during timer recording.
AL-REC OFF
TIMER
Alarm recording is performed only during recording types other than timer recording.
OLY AL-RC
ON TMR
Alarm recording is performed only during timer recording. Normal recording is not performed.
(8)
ALARM
DURATION Time selections: CC/5SEC/10SEC/20SEC(‹)/40SEC/1MIN/2MIN/3MIN/4MIN/5MIN/10MIN/15MIN
Sets the amount of time for recording when a single alarm is received.
(9) VIDEO LOSS
‹ ON
“VIDEO LOSS” is displayed on the screen when the camera image is interrupted.
The WARNING signal is also output to a rear panel terminal.
OFF “VIDEO LOSS” is not displayed on the screen when the camera image is interrupted.
e00_l8hae_us_7.book Page 29 Thursday, April 8, 2004 11:14 AM