Sling Media Sling Slingbox PRO-HD SB300-100 - Manual (Page 11)

STEP 4: ATTACH REMOTE CONTROL IR CABLE
Connect the remote control Ir cable to the Ir jack on the
Slingbox. next, place a remote control Ir cable head on the top
or bottom of your a/V device so it points at its Ir sensor.
Make sure that the head of the remote control
Ir cable extends out far enough over the front
your a/V device to send a signal to it. you may
want to affix the remote control Ir cables using
the adhesive pads after you've determined their
correct positions.
TIP: The Ir sensor is on the front of your a/V device. Some sensors are behind
a dark, reddish plastic window. Others may be hidden behind the plastic on the
front of the device. If you don't see the sensor, shine a flashlight on the front of
the device and look for a small bulb similar to the one on the end of
the remote control Ir cable. To control more than one device, you
can use the multi-head remote control Ir cable that came with your
Slingbox PrO-HD. you can use one or more Ir heads per device as
needed.
9
IR SENSOR SIDE VIEW