Sling Media Sling Slingbox PRO-HD SB300-100 - Manual (Page 8)

STEP 2: CONNECT YOUR SD SOURCE
VIDeo:
If you have an SD (standard definition) a/V device, you can
connect it to your Slingbox using the included composite
cables. Composite cables have a yellow connector for video,
along with red and white connectors for audio. Insert the
yellow connector into the yellow composite jack labeled In on
your Slingbox PrO-HD. This jack is in the top row on the back of
your Slingbox. Connect the other end of this video cable to the
yellow video output jack on your SD video source
If your SD a/V source is already connected to your TV with
composite cables, disconnect them from the TV and then
re-connect these cables to the composite In jacks on your
Slingbox. Use the matching cable set included with your
Slingbox to connect to the composite OUT jacks on the back of
your Slingbox, and then to the In jacks your TV.
6