Sony STR-DA1200ES - Manual (Page 74)

74 GB
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input to 2
channel analog input. This function enables you to
enjoy high quality analog sources.
When using this function, only the volume and front
speaker balance can be adjusted.
Press A.DIRECT.
Analog audio is output. ANALOG DIRECT
function is toggled between on and off as you press
A.DIRECT.
To enjoy the analog sound
source with noise free
performance
(Analog pureness control)
The Analog pureness control function by-
passes the video and digital circuits that are not
in use, and shuts down the power while the
analog source is being played back. Thus, the
Analog pureness control function provides
noise-free audio performance and delivers
high sound quality.
The Analog pureness control function is
activated when you select an input source with
no video input, then select “ANALOG” from
INPUT MODE, and you press ANALOG
DIRECT.
Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
Turn on the receiver and TV.
2
Press ON SCREEN.
Switch the input of the TV so that the
setting menu is displayed on the TV
screen connected to this receiver.
3
Press RECEIVER.
Receiver operation is enabled.
4
Press MENU.
The list of setting menus appears.
A.DIRECT
2,
12
1
5-11
3
4