Sony STR-DA1200ES - Manual (Page 92)

92 GB
Notes
• You cannot use the FRONT SPEAKERS B jacks
for a bi-amplifier connection.
• When you use the auto calibration function, make
the bi-amplifier settings before you perform auto
calibration.
• If you make the bi-amplifier settings, the speaker
level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
• Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
• The audio signal of the center speaker of the
MULTI CHANNEL INPUT jack is not output
from the front left/right speakers when you set
“SUR BACK SP” to “BI-AMP” in the Speaker
Settings menu.