Smart Parts 100 s - Manual (Page 23)

19
How to choose your stitch
To select a stitch, simply turn the stitch selection dial. The stitch
selection dial may be turned in either direction. The following page
shows the recommended range of stitch lengths and widths.
Adjust the stitch length with the stitch length dial. You may choose
stitch width by turning the stitch width dial.
Adjust the stitch length and stitch width according to the fabric being
used.
To obtain any of the other stitches shown in the upper row on the
stitch selection panel, select the letter above the stitch with the stitch
selection dial. Adjust the stitch length and the stitch width with the
control dials according to the result desired.
To obtain any of the stitches on the second row, turn the stitch length
dial to "S1" or "S2", select the stitch desired with stitch selection dial,
and adjust the stitch width with the stitch width dial.
Reverse lever Stitch width dial
Stitch selection dial
Stitch length dial