Sennheiser EK 300 IEM - Manual (Page 18)

17
Adjusting settings via the operating menu
The extended menu “ Advanced Menu ”
To get into the extended menu “ Advanced Menu ”:
̈
From the main menu, select “ Advanced ”.
Setting the receiving frequencies and the frequency banks “U1”
to “U6 – “Tune”
Via the “ Tune ” menu item, you can set a receiving frequency to be stored
in the current channel or you can select a different channel in one of the
frequency banks “ U1 ” to “ U6 ” and assign this channel a receiving
frequency.
Setting a receiving frequency for the current channel
Selecting a channel and assigning this channel a frequency
When you have selected one of the system banks and then select
the “
Tune ” menu, the diversity receiver automatically switches to
channel 1 of the frequency bank “ U1 ”. In this case, “ U1.1 ” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks “ U1 ” to “ U6 ”
are not assigned a receiving frequency.
̈
Press the rocker button until the “ Tune ” menu item appears.
̈
Press the SET button.
The MHz section of the receiving frequency of the channel is
highlighted.
It is vital to observe the notes on frequency selection on page 20.
̈
Press the rocker button to set the MHz section of the
frequency.
̈
Press the SET button to confirm the MHz section of the
frequency.
The kHz section of the frequency is highlighted.
̈
Press the rocker button to set the kHz section of the frequency.
̈
Press the SET button to confirm the frequency.
“ Stored ” appears on the display panel. The “ Tune ” menu item
appears again.
̈
Press the rocker button until the “ Tune ” menu item appears.
̈
Press the SET button and keep it pressed until the frequency
bank is highlighted.
SET
Tu n e
B.Ch: U1. 1
Tu n e Advanced Menu
Tune
“Stored”
823.925 MHz
823 .925 MHz
B.Ch: U1. 1
823. 925 MHz
SET SET
SET
Select the frequency
bank and confirm
Select the channel;
store the setting
Call up “Tune”
(special function)
SET
SET
SET
Tu n e
B.Ch: U1 . 1 B.Ch: U5. 1
Tu n e Advanced Menu
Tune
“Stored”
823.925 MHz
823.925 MHz 823.925 MHz
SET SET
SET
Select the frequency
bank and confirm
Select the channel;
store the setting
Call up “Tune”
(special function)