Standard Horizon VHF/FM Marine Handheld Transceiver HX600S - Manual (Page 14)

HX600S Page 12
4.1.4 USING THE CD-33 CHARGER CRADLE
1. Turn the transceiver off.
2. Insert the DC plug from the NC-88 into the DC jack on the CD-33 side
panel, then plug the NC-88 into the AC line outlet.
3. Insert the HX600S (with the battery pack) into the CD-33; the antenna
should be at the left side when viewing the charger from the front.
4. If the HX600S is inserted correctly, the Red indicator on the CD-33 will
glow. A fully-discharged pack will be charged completely in approximately
10 hours.
5. When charging is completed, disconnect the pack from the CD-33, and
unplug the NC-88 from the AC line outlet.
4.1.5 MOUNTING THE CD-33 ON THE VESSEL
The CD-33 is designed to be surface
on a vessel which can be connected to
the charger and a GPS that supplies NMEA data for DSC Distress transmis-
sions.
If mounting on a vessel, the CD-33 must be mounted in a location on the
vessel that is directly shielded from rain or splashes of water. After the loca-
tion is found, mount the CD-33 using the supplied mounting screws.
CD-33 Desktop Mount