Smeg 142468 - Manual (Page 7)

142468
•
Place the appliance in dry and well aired room.
The appliance operates best at temperature
ranges indicated in the chart below. Relevant
class of the appliance is indicated on the rating
plate.
Positioning the appliance requires two persons in
order to avoid injuries or damage to the appliance.
•
Place the appliance fl atly and fi rmly on a solid
base. The appliance is fi tted with adjustable feet
on the front side, used to level the appliance.
Rear side of the appliance is fi tted with wheels
(certain models only) facilitating the positioning of
the appliance at the preselected place.
•
The element above the appliance must be at
least 5 cm away to allow suffi cient cooling of the
condenser.
•
Avoid exposing the appliance to direct sunlight
or heat sources. If this is not possible, install
insulation plate between the appliance and
adjacent heat source.
•
Bottom front corners of the appliance is fi tted with
handles to facilitate moving. The appliance may
stand independently or adjacent to a furniture
element or wall. Be sure to leave enough space
for the opening of the door, to avoid damage to
the appliance or personal injury. Also leave ample
space for extracting shelves (see installation
diagram).
7
Class Ambient temperature
SN (subnormal) from +10°C to +32°C
N (normal) from +16°C to +32°C
ST (subtropical) from +18°C to +38°C
T (tropical) from +18°C to +43°C
Installation and connection
Selecting the location
Positioning the
appliance