Using the control panel continued – Sunbeam EM8900 User Manual

Page 10

Advertising
background image

Using the control panel continued

pressure onto the coffee cake. After this
the full water pressure is applied and the
espresso will pour freely.
Note: When the coffee maker has activated
the single espresso operation the lights
above the ‘MANUAL’ and

double

espresso buttons will go off. The lights above
the ‘POWER’ and single espresso buttons
will remain on.

Note: The coffee maker does not need to
press the single espresso button again to
end the pour as the espresso machine will
stop automatically.
Once the pour of liquid espresso stops the
espresso machine is ready to make another
espresso.
Note: When using the single espresso
operation you can stop the pour of espresso
at any time by pressing the ‘MANUAL’,
single, or

double espresso operation

buttons.

Double Espresso

The

double espresso function removes

the guesswork and is programmed to pour
70mls of liquid espresso.
Tip: We recommend using the double cup
filter when using the programmed

double

espresso operation.
Once the espresso machine is switched on
and heated, so the light above the ‘POWER’
button is red and the lights above the
‘MANUAL’, single and

double espresso

buttons show a constant green light, the
coffee maker is able to use the

double

espresso operation. The coffee maker simply
needs to press the

double espresso

button once to start and the pour of liquid
espresso will stop automatically.
Important: Once the

double espresso

operation is activated, before the espresso
pour starts the pre-infusion feature will
release three short bursts of gradual water
pressure onto the coffee cake. After this
the full water pressure is applied and the
espresso will pour freely.
Note: When the coffee maker has activated
the

double espresso operation the lights

above the ‘MANUAL’ and single espresso
buttons will go off. The lights above the
‘POWER’ and

double espresso buttons

will remain on.

Note: The coffee maker does not need to
press the

double espresso button again

to end the pour as the espresso machine will
stop automatically.
Once the pour of liquid espresso stops the
espresso machine is ready to make another
espresso.
Note: When using the

double espresso

operation you can stop the pour of espresso
at any time by pressing the ‘MANUAL’,
single, or

double espresso operation

buttons.

Program
The program function allows the coffee maker
to personalise and save their own espresso
pour settings.
Note: Refer to the section ‘Programming
your espresso machine’ for simple to follow
instructions.

9

Advertising