Sony STRDG910 User Manual
Page 48
48
GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB04AMP_STR-DG910-CEL.fm
masterpage: Left
STR-DG910
3-094-430-31 (1)
a)
For details, refer to the page in the parentheses.
b)
You can only select this parameter when the surround back speakers are set to “SINGLE”.
c)
You can only select this parameter when the surround back speakers are set to “DUAL”.
d)
When you select this parameter, the “HDMI” flashes on the display.
e)
When you set “CAL LOAD” in A. CAL menu to “LOAD YES”, the setting is displayed as x.xx m and you
can adjust the setting in 0.01 meter increment.
f)
This parameter is only available when at least one speaker is set to “SMALL” and “CAL LOAD” is set to
“LOAD NO” in A. CAL menu.
g)
Models of area code CEL, CEK, E2 only.
Menu
[Display]
Parameters
[Display]
Settings
Initial
setting
A. CAL
[8-A. CAL]
Auto Calibration on/off
a)
[AUTO CAL]
A.CAL YES, A.CAL NO
A.CAL NO
Calibration type
a)
[CAL TYPE]
ENGINEER, FLAT, FRT REF
FLAT
Preset measurement loading
a)
[CAL LOAD]
LOAD NO, LOAD YES
LOAD NO