Sony STRDG910 - Manual (Page 76)

76 GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB06OTH_STR-DG910-CEL.fm masterpage: Left
STR-DG910
3-094-430-31 (1)
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press one of the input buttons
to select the input you want to
create an index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
3
Press MENU.
“1-LEVEL” appears on the display.
4
Press V/v repeatedly to select
either “5-AUDIO” or “6-VIDEO”.
5
Press or b to enter the
menu.
6
Press V/v to select “NAME IN”.
7
Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 69).
Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
All inputs except the FM and AM
band
Index name of the input a) t Selected input
t Sound field currently applied
FM and AM band
Program Service name b) or preset station
name a) t Frequency t Program Type
indication b) t Radio Text indication b) t
Current Time indication (in 24-hour system
mode)
b) t Sound field currently applied
a) Index name appears only when you have assigned
one to the input or preset station (page 68, 76).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
b) During RDS reception only (Models of area code
CEL, CEK only) (page 69).
Note
Character or marks may not be displayed for some
languages.