Drc (dynamic range compression), Audio sync, Hdmi audio – Samsung HT-D450 User Manual

Page 25

Advertising
background image



English

English



03

Setup

Ideal Center

Speaker placement

Df: The distance from Front Speaker

Dc: The distance from Center Speaker

Ds: The distance from Surround Speaker

Place all speakers within this circle.

Ideal Surround

Speaker placement

Setting the Center Speaker

If the distance of Dc is equal to or longer than the

distance of Df in the figure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance

between

Df and Dc

0.00m 0.34m 0.68m 1.06m 1.40m 1.76m

Delay

Time

00 ms 01 ms 02 ms 03 ms 04 ms 05 ms

Setting the Surround Speaker

If the distance of Dc is equal to or longer than the

distance of Ds in the figure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance

between

Ds and Dc

0.00m 1.06m 2.11m 3.16m 3.62m 5.29m

Delay

Time

00 ms 03 ms 06 ms 09 ms 12 ms 15 ms

NOTE

With PL II (Dolby Pro Logic II), the delay time

may be different for each mode.

With AC-3 and DTS, the delay time can be set

between 00 and 15mSEC.

The Center channel is only adjustable on 5.1

channel discs.

`

`

`

Test Tone

Settings

m

Move " Select ' Return

Speaker Setting

Speaker Size

Sound Edit

Delay Time

Test Tone

: On

"

Select ' Return

Use the Test Tone feature to check the speaker
connections.

Press the _+ buttons to select On.
The test tone will be sent to Front Left ➞ Center

Front Right ➞ Surround Right ➞ Surround

Left ➞ Subwoofer

in order.

To stop the test tone, press the ENTER button.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest

and quietest sounds. You can use this function to

enjoy Dolby Digital sound when watching movies at

low volume at night.

You can select either Full, 6/8, 4/8, 2/8, off.

AUDIO SYNC

Video and audio sync may not match with digital TV.

If this occurs, adjust the audio delay time to

match the video

You can set the audio delay time between 0 ms

and 300 ms. Set it to the optimal status.

HDMI Audio

The audio signals transmitted over the HDMI Cable

can be toggled On/Off.

Off :

Video is transmitted over the HDMI

connection cable only, and audio is output

through the product speakers only.

On :

Both video and audio signals are transmitted

over the HDMI connection cable, and audio

is output through your TV speakers only.

~
~

~

~

~

~

HT-D450-XU-ENG-0303.indd 25

2011-03-05 �� 11:38:11

Advertising
This manual is related to the following products: