Samsung HT-D450 - Manual (Page 36)


English
Advanced Functions
English

USB function
Playing Media Files using the
USB Host Feature
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 5.1
channel sound by connecting the storage device to
the USB port of the product.
Connect the USB device to the USB port on the
front panel of the product.
Press the FUNCTION button to select USB.
USB appears on the display screen and then
disappears.
Press the _+ buttons to select Videos, Photos
or Music.
- Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
Press the YELLOW(C) button.
- REMOVE will appear on the display.
Remove the USB cable.
NOTE
To listen to your music files with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 34)
Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
1.
2.
~
3.
~
~
✎
`
`
USB Recording
While playing CD-DA (Compact Disc Digital Audio)
using the USB Recording function or listening to the FM
radio or receiving audio source from an external device,
you can record the audio source in the USB memory.
Ex) USB recording of CD-DA audio contents
Connect the USB device to your product.
Insert the CD-DA disc into the CD tray.
Press the USB REC button on the remote
control.
To start ripping the current track, press
the USB REC button on the remote
control while the system is playing a track or
stopped temporarily.
To record the entire CD, press and hold the USB
REC button on the remote control.
- "FULL CD RIPPING" appears on the display and
recording starts.
Press the STOP (@) button to stop recording.
When USB recording of a CD is completed, you
will find a new folder named “RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
When USB recording of FM radio or AUX source is
completed, you will find a new folder named
“TUNER RECORDING or AUX RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
NOTE
Do not disconnect the USB connection or the power cable
during the USB Recording. Otherwise, it may cause damage
to the data.
To stop USB Recording, press the STOP button and
disconnect the USB device after the system stops playing
the CD completely.
If you disconnect the USB connection during the USB
Recording, the system will turn off and you will not be able
to delete the recorded file.
If you connect the USB device to the system while it is
playing a CD, the system stops temporarily and will play
again.
DTS-CDs cannot be recorded.
If the recording duration is less than 5 seconds, a recording
file may not be created.
USB Recording works only if the USB device is formatted in
the FAT file system. (The NTFS file system is not supported.)
The audio signal will not be output during USB recording of
the CD.
When HDMI AUDIO is set to On, the USB Recording
function is not supported.
1.
2.
3.
~
~
4.
~
~
✎
`
`
`
`
`
`
`
`
HT-D450-XU-ENG-0303.indd 36 2011-03-05 �� 11:38:19