Sony MZ-NH900 - Manual (Page 41)

41
It will not be possible to make a group setting if
the tracks, groups and disc name on a disc
exceed the maximum number that can be input
(in MD mode only).
The recorder is factory set to create a new
group automatically by sliding zREC to
the right. This is convenient when
recording several CDs in succession. You
can check the group recording setting as
follows.
While the recorder is stopped, enter the
menu and select “REC Set” - “
:REC” -
“ : REC On”.
To record without creating a
new group
Select “ :REC Off” at the end of the
procedure above.
You can add a track to an existing group.
Adding a new track at the end
of the selected group
1
While the recorder is stopped and the
group to which you want to add a
track is selected, slide zREC to the
right while pressing GROUP.
2
Play the sound source.
A new track will be added at the end
of the current contents within the
group.
Adding a track at a desired
position within the selected
group
1
While the recorder is play-paused at
the point within the group where you
want to add a new track, slide zREC
to the right while pressing GROUP.
2
Press X to start recording and play
the sound source.
Note
To create a new group
automatically when
recording
GROUP
z REC
X
NAVI/MENU
5-way control key
(NENT)
Jog dial
Recording tracks to an
existing group