Sony MZ-NH900 - Manual (Page 62)

62
5
Repeat step 4, and then enter all
characters of the label name.
6
Press NENT for 2 seconds or more .
Re-labeling
You can change the label of the disc, a
group or a track by doing the procedure
for “Labeling” (page 61).
Assigning tracks or
groups as a new group
(Group Set)
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 255 groups
on a Hi-MD disc or a standard disc in Hi-
MD mode and 99 groups on a standard
disc.
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
It is not possible to make a new group if
the first track or last track of the group has
been selected from the middle of an
existing group.
Track numbers appear according to their
order on the disc, not their order within
the group.
To insert a blank
space. Press GROUP and
press the 5-way
control key towards
> at the same
time.
To delete a letter. Press GROUP and
press the control key
towards . at the
same time.
To cancel labeling. Press x for 2 seconds
or more.
To move the cursor
from the letter input
area to the character
palette. Press the 5-way
control key towards
VOL –.
To move the cursor
from the character
palette to the letter
input area. Press x.
To display
“_ (space)”, “:”, “/”,
or “–” at the input
position in the letter
input area. Press X.
To switch between
capital letters and
small letters
.
Press X.
1) Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
Functions 1) Operations
1 2 4 5 6 7 8 9 101112 3
1 2 4 5 6 9 101112 3 7 8
Group 1 Group 2
Group 2 Group 1
Assigning tracks 1 to 3 to a new
group
Assigning group 1 and group 2 to a
new group
Track number
Disc
Disc