Seagate CHEETAH ST34501FC - Manual (Page 29)

Cheetah 4LP FC Installation Guide, Rev. B 27
Troubleshooting
Before calling Seagate Technical Support, please read the pos-
sibilities discussed below. The suggestions presented here will
resolve the majority of installation problems.
General installation troubleshooting
• Check system compatibility. This is a Fibre Channel (FC)
device. Check your system documentation to ensure that it
supports FC devices.
• Check the physical attachment. Ensure that the drive is
properly mated with the backpanel Fibre Channel single
connector attachment (FC-SCA).
• Check to ensure that drive is receiving power. Insert the
drive into your system. Listen carefully for the sound of the
drive motor spinning up. If the drive motor does not spin up,
check the power supply. If your power supply is functioning
properly, but the drive does not spin up, contact the com-
pany from which you purchased the drive.
• Check your system or backpanel documentation to
ensure you have set options in accordance with the
manufacturer’s recommendations. All device options,
including addresses, are set at the backpanel within the
host system or through system software. Check your host
system documentation about how to set these options in
your particular system.