Sony ZS-M35 - Manual (Page 21)

The CD Player•The MD Player 21
The CD Player•The MD Player
Tips
• If the program play is
finished, the program
is saved. You can play
the same program
again by pressing u.
• If you open the lid of
the CD compartment,
the program is erased.
• If you take out the MD,
the program is erased.
• During play, total
programed time cannot
be displayed.
To cancel Program Play
Stop play first. Then, press SHUF/PGM until “PGM”
disappears from the display.
To check the order of tracks before play
Before starting the program play, press YES•ENTER.
Every time you press YES•ENTER, the track number
appears in the programed order.
To change the current program
Change before starting the program play.
To Do this
erase the last track in 1 Press NO•CANCEL.
the program The track programed last is
erased.
2 Re-enter the track numbers by
pressing the number/character
buttons.
change the whole 1 Press x to erase the whole
program completely program.
2 Create a new program
following the programing
procedure.