Sony ZS-M35 - Manual (Page 52)

The Timer 52
STANDBY
Before you begin, make sure “TIMER” is not
displayed. If displayed, press STANDBY.
1
Prepare the music source you want to play.
Source Do this
MD Insert an MD.
CD Insert a CD.
RADIO Tune in the station.
LINE Turn on the component tconnected to
LINE IN.
2
Press TIMER.
“TIMER” flashes in the
display.
Make the following settings by checking the
indications in the display.
3
Press > or . until “PLAY” flashes in the
display, and press YES•ENTER.
“MD”, “CD”, “RADIO” or “LINE” flashes in the
display.
4
Press > or . until the music source you want
to play (“MD”, “CD”, “RADIO” or “LINE”)
appears in the display, and press YES•ENTER.
Waking up to
music
You can wake up to music or a radio
program at a preset time.
Make sure you have set the clock (see
“Setting the clock” on page 50).
YES
ENTER
TIMER
Notes
• You cannot preset
waking up timer and
recording timer (page
55) at the same time.
• When playing the
sound of the
component connected
to the LINE IN jack of
the player, refer to the
operating instructions
of the component.
>, .
Number/
character
buttons