Sangean DDR-22 - Manual (Page 20)

19
DRC Value Control
1. In DRC value mode, the user will be presented with a menu.
The top line will contain the currently selected DRC value.
The bottom line will contain the first value in the list,
with scrolling indicators.
2. Press OK then Tuning +/- buttons to scroll through the option
DRC 0 DRC 1/2 DRC1 DRC 0 …….
3. Press OK to confirm the selection.
Note:
DRC ( Dynamic Range Control ) can make quieter sounds easier to
hear when your radio is used in a noisy environment.
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
DDR-22_381P101_GB.p65 2006/3/23, ¤W¤И 09:49 20