Sangean DDR-22 - Manual (Page 31)

30
Headphone use
Headphone use with this radio should be fitted with a 3.5 mm
jack plug. Insert the headphones into the socket marked on
the rear side of the radio. When the headphones are plugged in,
the loudspeaker is automatically disconnected.
Flat/3D sound effect
Switch the 3D switch (on the rear side of the radio) to get flat or
3D sound effect.
Mute
Press the MUTE button to mute the audio output.
Display will show MUTE.
Press the MUTE button again or press Volume Control buttons
will release mute.
GB
DDR-22_381P101_GB.p65 2006/3/23, ¤W¤И 09:49 31