Sony CDX-C6850 - Manual (Page 15)

15
Changing the sound and
display settings
The following items can be set:
• Clock (page 7).
• D.Info (Dual Information) - to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
• Amber/Green - to change the illumination
color to amber or green.
• Dimmer - to change the brightness of the
display.
— Select “on” to dim the display.
• Contrast - to adjust the contrast if the
indications in the display are not
recognizable because of the unit‘s installed
position.
• Beep - to turn on or off the beeps.
• RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
• Loud (Loudness) - to enjoy bass and treble
even at low volume. The bass and treble will
be reinforced.
• HPF (High Pass Filter).
• LPF (Low Pass Filter).
• M.dspl (Motion display) - to turn the motion
display 1, 2, or off.
• A.Scrl (Auto Scroll) (page 8, 17).
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.
1
Press (SHIFT).
2
Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
Clock n D.Info* n Amber/Green n Dimmer
n Contrast n Beep n RM n Loud* n HPF*
n LPF* n M.dspl n A.Scrl*
* When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on
the source.
3
Press (5) (n) to select the desired
setting (Example: on or off).
For the “Contrast” setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
4
Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.