Selecting the cool mode – Samsung AQV18J User Manual
Page 10
E-
10
Selecting the Cool Mode
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
1
To control the airflow direction, refer to page 16.
5
You can change modes at any time.
Note
Press the
button on the remote control until
is displayed.
Result:
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Cool mode.
2
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan operates consistently.
3
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
)
Silence mode
Low
Medium
High
Maximum
4
Result:
Each time you press the
button, the indoor unit
beeps.
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
Note
Silence mode(
) makes the noise quieter during
operating the indoor unit in the Cool mode.
ГАЦЮПт_DB98-27555A_IB_E.indd 10
2007-3-5 19:20:06