Sony Portable MD Recorder MZ-RH710 - Manual (Page 43)

model name1[MZ-RH710] model name2[MZ------]
[2-593-568-11(2)]
masterpage:L0-Right
filename[E:\SONY
PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB
-MZ-RH710EE\04GB0OPE.fm]
43
Editing recorded tracks
Before editing
• When you edit the contents of a 1GB Hi-MD
disc, use a new alkaline dry battery (battery
level indication shows
) or connect the
optional AC power adaptor to the recorder.
When you attempt to edit on a 1GB Hi-MD
disc, “NotENOUGH POWER TO EDIT” may
appear and editing cannot be done even if the
battery level indication shows sufficient
remaining power while the recorder is stopped
or playing. This is because of a mechanism
that disables editing when the remaining
battery power is estimated by the recorder to
be insufficient due to the high power
consumption required for 1GB Hi-MD disc
editing.
• Before making an editing while using the
optional AC power adaptor, always insert a
new alkaline dry battery into the recorder first
to ensure that the editing operation completes
successfully.
• Premastered discs cannot be edited.
• Close the record-protect tab on the side of the
disc before editing
• Do not move or jog the recorder or disconnect
the power source while editing or “SYSTEM
FILE WRITING” is flashing in the display. If
you do, the data edited up to that point may
not be recorded to the disc, or data on the disc
may be damaged. “SYSTEM FILE
WRITING” flashes while the editing results
are being recorded.
• While “SYSTEM FILE WRITING” is
flashing, the lid becomes locked.
Adding titles (Title
Input)
You can add titles to tracks, groups and
discs. You can also add artist names and
album names to tracks on a disc used in
Hi-MD mode.
Available characters
• Capital and small letters of the alphabet
for English and European languages
1)
• Numbers 0 to 9
• Symbols 2)
1) European alphabets appear only for discs used
in Hi-MD mode.
2) The available symbols will differ for Hi-MD
mode and MD mode (see “About the character
palette” on page 44).
Maximum number of
characters per name
Track names, group names, and disc
name: Approx. 200 each (containing a
mixture of all available characters)
Maximum number of
characters that can be input
per disc*
In Hi-MD mode:
A maximum of about 55,000 characters
In MD mode:
A maximum of about 1,700 characters
* The number of titles that can be stored on a
disc depends on the number of characters that
nare input for track names, group names,
artist names, album names and disc name.
Notes
continued
020REG.book Page 43 Tuesday, April 12, 2005 11:18 AM