Synchro-recording with a sony cd player z, Recording on mds 14 – Sony MINIDISC DECK MDS-S38 User Manual

Page 14

Advertising
background image

Recording on MDs

14

EN

Synchro-Recording with Audio
Equipment of Your Choice
Z

By using the MUSIC SYNC button on the remote, you
can automatically start recording in sync with the
signal input from the program source through the
LINE (ANALOG) IN jacks or the respective digital
input connector (Music Synchro-Recording).
The method of marking track numbers differs,
depending on the program source being recorded and
how the deck is connected to the program source. (See
“Notes on Recording” on page 9.)

1

Do Steps 1 to 5 in “Recording on an MD” on page
6.

2

Press MUSIC SYNC.
The deck changes to recording pause.

3

Start playing the program source you want to
record.
The deck starts recording automatically.

To stop Music Synchro-Recording

Press p.

Note

When Music Synchro-Recording, the Smart Space Function
and the Auto Cut Function turn on automatically regardless
of their setting (on or off) and type of input (digital or
analog).

Synchro-Recording with a Sony
CD Player
Z

By connecting your deck to a Sony CD player or Hi-Fi
Component System, you can easily dub CDs onto MDs
using the CD synchro buttons on the remote. If your
deck is connected to a Sony CD player by a digital
input cable, track numbers are automatically marked
as appear on the original regardless of whether
“LevelSync ON” or “LevelSyncOFF” is selected. If
your deck is connected to a Sony CD player by audio
connecting cords through LINE (ANALOG) IN, track
numbers are automatically marked when you select
“LevelSync ON” (see “Marking Track Numbers while
Recording” on page 12).
As the same remote controls both the CD player and
the deck, you may have trouble operating both units if
they are far from each other. If you do, place the CD
player close to this deck.

1

Set the source selector on the amplifier to CD.

2

Do Steps 2 to 5 in “Recording on an MD” on page
6 to prepare the deck for recording.

3

Insert a CD into the CD player.

4

Select the playback mode (Shuffle Play, Program
Play, etc.) on the CD player.

r

6

)

0

+

=

+

=

P

p

P

·

STOP

CD PLAYER P

START

STANDBY

r

6

)

0

+

=

p

P

·

MUSIC SYNC

Advertising