Sony SRS-BTM30 - Manual (Page 15)

15
US
Listening to the sound
VOLUME
Check the following before operating the unit.
– If you have been listening to the sound from the BLUETOOTH stereo audio source device, stop
playing on the device or terminate the BLUETOOTH connection.
1
Press the 1 button to turn on this unit.
The 1 indicator lights up.
2
Start playing on the source device.
3
Adjust the volume.
Set the volume of the source device to moderate level, and press the VOLUME +/–
buttons on this unit.
Note
A beep sounds when the volume is set to minimum or maximum.
4
Press and hold the 1 button to turn off this unit after using.
The 1 indicator goes off.
Notes
• If connecting the speaker to a device with a built-in radio or tuner, radio broadcasting cannot be received or
sensitivity may be reduced significantly.
• If the source device has a bass boost function or equalizer function, set them to off. If these functions are on,
sound may be distorted.
• If the source device’s headphone output has a line switch, better sound will be heard if it is set to on. See the
operating instructions of the source device.
• If both the BLUETOOTH connected device and the one connected to the INPUT jack are played at the same
time, both sounds can be heard.
1 button VOLUME +/– buttons