Function operations – SBC comm SBC-125 User Manual
Page 13
To access the function settings of this phone, press the
MENU button and use the or
buttons to select a function. NOTE: The phone must be in the on-hook position to access the
MENU mode settings.
The setting sequence is PHONE BOOK - CALL WAITING - DATE FORMAT - HOUR FORMAT -
SET FLASH - SET AREA CODE - SET LANGUAGE - SET TIME - LCD CONTRAST - BACK LIGHT.
After selecting the desired function, press the
ENTER button to review or change settings.
When complete, press the
MENU button to exit.
PHONE BOOK
To add number and name to the phone book:
1. Press the
MENU button to select the PHONEBOOK menu then press
ENTER; the LCD will show: “REVIEW >>”. Press the or button to select
the ADD >> menu, then press the
ENTER button to enter the function for
adding name and number to the PHONEBOOK.
2. Using the keypad, enter the phone number. To delete a number incorrectly
entered, press the
DELETE button to delete the incorrect digit(s) and
reenter the correct digit(s). NOTE: the maximum number of digits that
can be entered is 20; if the number exceeds 20, the LCD will show “TOO
LONG” and the exceeding digits will not be stored.
3. After finishing the number setting, press and hold the
ENTER button to
enter the name setting (the cursor will move to the next line), then press
the appropriate keys to get the following characters:
If the next character is on the same button as the previous one, you press
the
ENTER button before entering the same letter again. NOTE: To add a
space between names press
ENTER-TWICE.
4. When the setting is completed, press and hold the
ENTER button to store
the record and go on to the next phone number you want to enter.
To review the number/name in phone book:
1. With the phone on-hook, press the
MENU button to select the
PHONEBOOK menu, then press
ENTER, the LCD will show “REVIEW >>”.
Press the
ENTER button to enter the function of reviewing the name/
number. Use the or button to review. You can also quickly review the
list by the first letter of the name. When pressing the first letter of the
name, the LCD will display the matching name(s), then use the or
button to select the right one.
Function Operations