SBC comm SBC-125 - Manual (Page 15)


TIME SETTING
If you have subscribed to Caller ID, the date and time will be automatically set when the
first call is received. To set the time manually follow the instructions below:
Press the MENU button, using the or scroll to SET TIME - press ENTER, then using the
keypad, enter the correct time, date and day of week. Press the MENU button to exit.
The setting sequence is hours - minutes - month - date - year - day of week.
After the year setting, the cursor for day of week will flash, you can use the or button
to activate/deactivate this setting. If the flashing cursor is active, the day of week will set
automatically, or if deactivated, the LCD will only show the “TOTAL CALLS XX” in the
standby state.
LANGUAGE SELECTION
The phone supports multiple languages. Press the MENU button, using the or
scroll to SET LANGUAGE - press ENTER to enter the language setting, then press
the or button to select the language. Press the ENTER button to confirm and
exit.
AREA CODE SETTING
When you use this phone for the first time, or move to an area that has a different
area code, you must enter your area code. This is necessary because the phone
must distinguish local or long distance calls to properly dial calls from the Caller ID
list and phonebook.
1. Press the MENU button, using the or scroll to SET AREA CODE - press
ENTER button.
2 LCD will Display “SET AREA CODE”.
3. Using the keypad dial buttons, enter your area code. Press
* to move the
cursor or press # to delete.
4. When the three-digit area code setting has been completed (for example: if
your area code is 858 the display will show ‘858’) then press ENTER
5. Phone will return to main menu
FLASH TIME SETTING
Press the MENU button, using the or scroll to SET FLASH - press ENTER
button and the current flash time will show on the LCD. Use the or button to
change the flash time (100ms/120ms/300ms/600ms). Press the ENTER button to
confirm and then press the MENU button to exit.
HOUR FORMAT SETTING
Press the MENU button, using the or scroll to HOUR FORMAT - press ENTER
and the current time format will be displayed. Press the or button to make
a selection (24 HOUR / 12 HOUR). Press the ENTER button to confirm and then
press the MENU button to exit. Note - If you subscribe to the Caller ID service, the
Caller ID will automatically set time and date.
Function Operations