Sanyo 9.1 - Manual (Page 10)

English
8
Setting to the card reader mode (or mobile
viewer mode)
1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera’s USB terminal to the computer’s USB connector.
2 Turn on the camera (see page 28 in the camera’s instruction
manual).
h The USB Connection Screen appears on the camera’s monitor.
3 Select “COMPUTER”, and press the SET button.
h The screen to select the computer connection mode appears.
4 Select “CARD READER”, and press the SET button.
h The camera changes to the card reader mode.
h When connecting a mobile viewer, select “MOBILE VIEWER” and
press the SET button. During this time, battery recharging is disabled.
OK CANCEL
USB CONNECTION
CANCEL
MOBILE VIEWER
PRINTER
COMPUTER
To USB connector
on the computer
Supplied dedicated
USB interface cable
To the USB terminal
on the camera