Sanyo 9.1 - Manual (Page 26)

English
24
CONNECTING IN THE MTP MODE
If Windows Vista is your computer’s operating system, you can connect your
camera in the MTP mode.
1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera’s USB terminal to the computer’s USB connector.
2 Turn on the camera (see page 28 in the camera’s instruction manual).
h The USB Connection Screen appears on the camera’s monitor.
3 Select “COMPUTER”, and press the SET button.
h The screen to select the computer connection mode appears.
4 Select “MTP”, and press the SET button.
OK CANCEL
USB CONNECTION
CANCEL
MOBILE VIEWER
PRINTER
COMPUTER
To USB connector
on the computer
Supplied dedicated
USB interface cable
To the USB terminal
on the camera