Sagem 700 - Manual (Page 57)

57
6. Appendix
6.1. Care and Maintenance
Switch off your Radio IP. Use a smooth and dry cloth to wipe it. Do not use a rough cloth,
powerful liquid cleaners, thinner painting, alcohol nor other solvents to clean it. These products
can damage your IP Radio.
6.2. Problems
Refer to the table presented below in case of an operational malfunction:
Problems Remedies
The remote control does not
function. • Check that the batteries are correctly introduced.
• Check that you too are not far from the Radio (7 meters are the
maximum recommended) and that the infra-red sensor is not
blocked.
• Make sure that the remote control is well pointed towards the sensor,
when manipulating the Radio.
The screen is switched off. Make sure that :
•
the power adapter is properly connected to a power socket.
• the power connector is properly plugged into the Radio.
• your fuse and circuit-breaker are in working order and that the power
socket is powered.
Choosen station can not be
heared. • To hear the station, you must confirm your selection by pressing OK
button.
• Make sure that your Radio is not set to MUTE mode.
• Check the volume level.
• Check the network configuration.
Audio parasites or clearness
less. The frequency FM is disturbed by parasites. Deploy the FM antenna jack
until obtaining a high signal.
If you use ear-phones, check that they function well.
Access denied to the Internet
Radio. Check the Wi-Fi router, Livebox or the line.
Access denied to the Radio
from a personal computer as
an access point (Media
Server). Check that your Radio is not encoded.
else you must have the encoding key to access.
The alarm does not ring. Check that the alarm source is configurated well (sample: the mp3 player
is disconnected,...).
A
PPENDIX