Using a wireless network, Wireless network setup, Clx-3185fw/clx-3185wk only) – Samsung CLX-318X User Manual

Page 47: 1 using a wireless network, Choosing your network connection, Printing a network configuration report, Ip addresses, Wireless network name and network key, Installing a wireless network with the wps button

Advertising
background image

Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 1

1.

wireless network setup

(clx-3185fw/clx-3185wk only)

This chapter gives you step-by-step instructions for setting up the wireless network connected machine and software.

This chapter includes:

Using a wireless network

Setting a wireless network with WPS button on the control panel

Setting a wireless network with USB cable

Setting a wireless network with network cable

Resetting factory default values

Completing the Installation

Troubleshooting

For more information about network environment, network programs

and Installing network connected machine’s driver, refer to following

chapters.

See "Network environment" on page 1.

See "Introducing useful network programs" on page 1.

See "Setting a wireless network with USB cable" on page 3.

See "Setting a wireless network with network cable" on page 8.

Using a wireless network

Choosing your network connection

Typically, you can only have one connection between your computer and

the machine at a time. There are two types of network connections to

consider.

Wireless network without an access point (Ad-Hoc mode)

Wireless network with an access point (Infrastructure mode)

Printing a network configuration report

You can print Network Configuration Report from the machine’s control

panel that will show the current machine’s network settings. This will help

you to set up a network and troubleshoot problems.
1. Press Menu on the control panel.
2. Press the left/right arrow until Network appears and press OK.
3. Press the left/right arrow until Network Info. appears and press OK.
4. Press the left/right arrow until Yes appears and press OK.
Using this Network Configuration Report, you can find your machine MAC

address and IP address.
For example:

MAC Address:00:15:99:41:A2:78

IP Address:192.0.0.192

IP addresses

Every device in a network has a unique numerical address called an IP

Address. Your machine came with a Default IP address of 192.0.0.192,

which you can verify by printing out Network Configuration Report or

Configuration Report.

DHCP IP assignment: Connect your machine to the network, and wait a

few minutes for the DHCP server to assign an IP address to the

machine. Then, print the Network Configuration Report as explained

above. If the report shows that the IP address has changed, the

assignment was successful. You will see the new IP address in the

report.

Static IP assignment: Use SetIP program to change the IP address

from your computer (See "Setting IP address" on page 2).

In an office environment, we recommend that you contact a network

administrator to set IP address for your machine.

Wireless network name and Network Key

Wireless networks require higher security. When an access point is first set

up, a network name (SSID), the type of security used and a Network Key

should be created for the network. Check this information before proceeding

with the machine installation.

After choosing your configuration, follow the simple directions for your

computer operating system, but first locate the Software CD supplied

with the machine before proceeding.

Installing a wireless network with the WPS button

If your machine and an access point (or wireless router) support Wi-Fi

Protected Setup™(WPS), you can easily configure the wireless network
settings by pressing the WPS (

) button on the control panel (See

"Setting a wireless network with WPS button on the control panel" on

page 2).

Infrastructure mode
This is an environment generally used for homes

and SOHOs. This mode uses an access point to

communicate with the wireless machine.

See "Installing the machine on a wireless

network with an Access Point (Windows)" on

page 3.

See "Installing the machine on a wireless

network with an Access Point (Macintosh)" on

page 6.

Ad-Hoc mode
This mode does not use an access point, the

wireless computer and wireless machine

communicate directly.

See "Installing the machine on an Ad-Hoc

wireless network (Windows)" on page 5

See "Installing the machine on an Ad-Hoc

wireless network (Macintosh)" on page 7

Advertising
This manual is related to the following products: