Schneider Electric 107FB4/10 - Manual (Page 9)

5
Camcorder, video games, headphone
Camcorder,Video games
The AV and S-VIDEO connections are located at the right
side of the TV or, for large screen sizes at the bottom;
Make the connections as shown opposite.
With the v key, select
AV .
For a monophonic device, connect the audio signal to the AUDIO
L input. The sound automatically comes out of the left and right
speakers of the set.
L
R S-VIDEO S-VIDEO S-VIDEO
VIDEO IN VIDEO IN VIDEO
AUDIO
Rear connections
Recorder ( VCR - DVD + RW )
Note: Do not place your recorder too close to the screen as some recorders may be susceptible to signals from the
display. Keep a minimum distance of 0,5 m from the screen.
EXT 1
CABLE
RECORDER DECODER
1
3
2
Connect the aerial cables 1, 2 and, to obtain the
optimum picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only
possible connection is via the aerial cable.
You will therefore need to tune in your recorder’s test
signal and assign it programme number 0 or store the test
signal under a programme number between 90 and 99, see
Manual store, p. 7.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder
handbook. You can also connect your decoder directly to
EXT1 or 2 with a eurocable.
EXT2
EXT1
CABLE
2
RECORDER
5 4
3
1
Other equipment (satellite receiver, decoder, DVD, games, etc.)
Connect the aerial cables 1, 2 and 3 as shown
(only if your peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to
one of the euroconnectors
EXT1 or 2 to obtain a
better picture quality.
Connect the equipment which produces the RGB signals
(digital decoder, games, etc.) to
EXT1 , and the
equipment which produces the S-VHS signals (S-VHS
and Hi-8 video recorders, certain DVD drives) to
EXT2
and all other equipment to either EXT1 or EXT2.
2328.1 gb 07-03-2005 09:26 Pagina 5