Sterling Power Products Pearl - Manual (Page 23)

20 Iss 2
Freewheel mechanism
A freewheel device disengages the power drive to allow manual operation
(Photo 6).
The freewheel is selected by operating the lever which is located at the rear
of the scooter. Once freewheel has been selected, the electronic drive
control system is disabled to prevent driving. This is a safety feature to
prevent you driving the scooter with the parking brake disengaged.
To turn off the freewheel and engage the motor, simply push the lever
forwards (Photo 6).
Note: Use extreme caution in the freewheel mode, especially on
slopes/inclines. Letting go of your scooter whilst it is in
freewheel, can cause the scooter to roll unexpectedly. This
could cause damage or bodily harm.
Caution!
It is advisable that during the first few sessions of operating your scooter
that the area around you is clear of obstacles and pedestrians.
Before operating your scooter, ensure the seat height has been adjusted
to your satisfaction, and the tiller angle has been set for optimum safety
and comfort.
Please see the “General Warnings”, “Getting on Your Scooter” and “Tiller
Adjustment” sections earlier in this handbook.
Operating your Scooter
Photo 6
Engaging
Free Wheel
Disengaging
Free Wheel
(Drive)