Sharper Image IB-ECB130 - Manual (Page 5)

Setting the Alarm:
For your convenience, two separate alarms may be set:
Alarm 1 button
Mode Selection
Set Alarm mode: Beep - Radio - Voice - Off
The display will show the Alarm 1 bell icon next to your selected mode.
Press and hold
1. Time flashing for HH, press +/- button to change Hour setting, press Alarm 1
button to confirm and change to minute setting.
2. Time flashing for MM, press +/- button to change Minute setting, wait for
timeout to save and go back to normal mode.
The display will show: Alarm 1 bell icon: HH: MM (AM/PM)
Alarm 2 button
Mode Selection
Set Alarm mode: Beep - Radio - Voice - Off
The display will show the Alarm 2 bell icon next to your selected mode.
Press and hold
1. Time flashing for HH, press +/- button to change Hour setting, press Alarm 1
button to confirm and change to minute setting.
2. Time flashing for MM, press +/- button to change Minute setting, wait for
timeout to save and go back to normal mode.
The display will show: Alarm 2 bell icon: HH: MM (AM/PM)
REPORT
Press the REPORT button once and real time data and outdoor temperature read-
ing will be announced.
Memory
The AM/FM radio station memory records a maximum of 8 channels.
• Normal mode with radio off, Press MEM button quickly to turn on radio and
automatically return to the last memory radio station.
• Select a station. Press and hold MEM button more than 2 seconds to record
new station. The MEM icon will appear and the memory digit will flash.
• Press the VOL +/- button to select memory number, Press Tuner +/- button to tune
the station, Press the MEM button to confirm current station into memory.
Snooze/Nap
Press the SNOOZE/NAP bar to snooze. This will automatically activate snooze
time for nine minutes. Or you may choose to set the alarm in 15, 30, 45, 60
minutes or OFF for nap.
Bottom Controls:
Backlight - HI/MED/LO
Slide switch to select the brightness level of backlight on display.
˚C/˚F
Slide switch to interchange between Celsius (°C) or Fahrenheit (°F) for
temperature level.
Daylight Savings Time (DST)
Slide DST ON/OFF switch to activate or inactivate the Daylight Savings Time feature.
Date/Time
1. Press and hold DATE/TIME button for more than 3 seconds, and enter the
“DATE/TIME SET MODE” setting.
2. Press DATE/TIME button once, to select the mode “year -> month -> day ->
hour -> minute -> exit”
3. Press the + or – buttons to select the correct date or time.
AUX IN
To use the auxiliary input to play music through the speaker insert a 3.5mm input
into the AUX IN jack. The unit will automatically detect the input and play the music.
8 9