Sonos Multi-Room Music System - Manual (Page 34)

Chapter 2: System Setup
2-19
Multi-Room Music System by selecting Add a ZonePlayer or ZoneBridge from
the Zones menu.
• Use the Sonos Controller to add the ZonePlayer to your Sonos Multi-Room
Music System by selecting System Settings>Add a ZonePlayer or Zone-
Bridge from the Music menu.
To control the volume from home theater
Set the line-out level on this ZonePlayer to Fixed by selecting one of the following
options:
• Using the Desktop Controller software, select ZonePlayer Settings from the
Zones menu. Select the ZonePlayer attached to your home theater, and then
click Settings. Click the Line-Out tab, and choose Fixed.
• Using the Sonos Controller, from the Music menu, select System Settings.
Select ZonePlayer Settings, and use the scroll wheel to highlight the
ZonePlayer attached to your home theater. Select Line-Out Level, and choose
Fixed.
To control the volume from Sonos system
1. Adjust your home theater or other audio device's volume to typical listening
volume.
2. Set the line-out level on this ZonePlayer to Variable by selecting one of the
following options:
• Using the Desktop Controller software, select ZonePlayer Settings from the
Zones menu. Select the ZonePlayer attached to your home theater, and then
click Settings. Click the Line-Out tab, and choose Variable.
• Using the Sonos Controller, from the Music menu, select System Settings.
Select ZonePlayer Settings, and use the scroll wheel to highlight the
ZonePlayer attached to your home theater. Select Line-Out Level, and choose
Variable.
3. Use the Controller to adjust the volume on your Sonos system so you can hear
music. This may be at the high end of the volume scale.
Note: When you change the line-out level to Fixed on your ZonePlayer, you will not
be able to adjust the volume or the equalization settings using your Sonos
Controller.