Sennheiser 502873 - Manual (Page 16)

15
Putting the RS 160 into operation
Powering the headphones
For powering the headphones, you can use:
• standard batteries (AAA size, 1.5 V)
• rechargeable batteries (AAA size, NiMH, 1.2 V, 600 mAh)
If you use rechargable batteries, you can charge them in the headphones
using the charging cable
ቫ
(see next chapter).
Inserting rechargeable batteries/standard batteries into the
headphones and changing the rechargeable batteries/standard
batteries
̈
Remove the ear pads
·
from both ear cups by turning the ear pads in
the direction of the arrow until you overcome a slight resistance.
̈
Lift the ear pads
·
off the ear cups.
̈
Remove the depleted rechargeable batteries or batteries (where
applies).
̈
Insert the rechargeable batteries or batteries. Observe correct polarity.
̈
Secure the ear pads
·
to the ear cups.
·
·