Using the rs 160, Switching the transmitter on and off – Sennheiser 502873 User Manual
Page 19
Using the RS 160
18
Using the RS 160
To switch the product on and to listen to your sound source, proceed as
follows:
Switching the transmitter on and off
Switching the transmitter on
̈
Press the multi-function button
ቢ
for approx. 1 second.
The transmitter switches on. The multi-function LED
ባ
flashes green,
indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED
º
of the headphones and the multi-function LED
ባ
of the transmitter
flash slowly.
Sequence of steps
Page
1. Make sure that the rechargeable batteries are charged.
16
2. Switch your sound source on.
–
3. Switch your transmitter on.
18
4. Switch your headphones on.
20
5. Adjust the desired volume.
21
1s
5s
2
1
º